Why are my brake lights staying on when the truck is off?

Brake lights are part of the tail light and illuminate when the brake pedal is pressed. If your brake lights are staying on with the vehicle off, the most common cause is a broken brake light switch or brake light switch stopper.

Why does brake light stay on Mercedes?

Bad Switch: One common reason for the Parking Brake light to stay on is a failing or failed switch. This can be checked easily by jiggling the handle after it is down. If the light turns off (or turns off and then back on), the switch is the most likely culprit and will need to be replaced.

Where is the brake switch located?

The switch is located right near the tip of your right foot near the brake pedal, so it’s easy to access. The switch may actually snap into place without the use of any tools at all.

Why won’t my parking brake light go off?

If it remains lit after the parking brake is released or if it turns on and off intermittently while you’re driving, it means you need to add brake fluid. If you check the fluid, add as needed and the light still doesn’t turn off, you’ll need to have the brake system inspected.

What is the electric parking brake in Mercedes?

Emergency braking The vehicle can also be braked during an emergency by using the electric parking brake. The vehicle is braked for as long as the handle of the electric parking brake is pressed. The longer the electric parking brake handle is depressed, the greater the braking force.

What causes parking brake not to release?

Water and dirt can cause cables to erode. This can cause your parking brake to fail, cables to snap, and brake pads to stick to the wheels. If you want to avoid stuck brakes, use your emergency brake on a regular basis to ensure corrosion hasn’t occurred. The e-brake can also freeze in place.

What does the brake light mean on a Mercedes Benz?

If the brake light comes on in your Mercedes Benz, you might think you need new brakes. It’s very possible that you might not need brakes at all. It might just be a simple fix to get the light to go out.

How to install brake stop light switch on Mercedes-Benz E-class?

Plug the wires in the new switch and install the new switch by twisting it counter-clockwise. Watch the following video on how to install brake stop light switch on an Mercedes-Benz E-Class .

How to fix parking brake lights that stay on?

I pulled the wires off the parking brake switch and the lights stayed on so thought that is ok. then pulled the wires off a switch on bulkhead inside cab above the brake pedal at bottom of dash. Lights went out. Put them back on and the brake lights went back on. So I replaced that switch and still, the lights stay on. More sharing options…

How do I troubleshoot a Mercedes Benz?

You can troubleshoot your Mercedes with a few steps and maybe save a trip to the brake repair shop. Park your vehicle and set the emergency brake. Turn the key to the “on” position where you will see all the lights come on the dashboard. Release the emergency brake and see if the light goes out.