What is K-Line adapter?
What is K-Line adapter?
K-line adapter is a data transmission device for connecting a vehicle ECU to a PC. It can be used for FADEC diagnostics and ECU reprogramming. This adapter is a second generation device of our production and differs from the previous version by having a built-in galvanic separation.
What is K-Line and L line?
K signal is basically the medium for most communications through OBD-II. The L signal is used for the initialization of the bus. The maximum data rate is 10.4Kbps and maximum signal voltage is 12V. K-Line is connected to pin 7 and L-Line is connected to pin 15 of the OBD-II port.
What is automotive K-Line for?
Technical Information. The K-Line is a very low-speed single-wire serial communication system used on many motor vehicles and commercial vehicles. It is commonly used for the diagnostic connections between the Electronic Control Modules (ECMs) on the vehicle and the diagnostic equipment (scan tools and data loggers).
What is ECU K-Line?
K-Line is a bidirectional line. It is used during initialization to convey address information from the diagnostic tester to vehicle ECUs, simultaneously with the line-L.
What is K-Line voltage?
K line signal voltage is 1V or so lower than battery voltage, Eg, if battery 12V, then signal voltage is about 11V, battery 24V; if battery 24V, then signal voltage is about 23V.
What is K-Line pattern?
In K-line series, if a K-line subseries contains some knowledge used to predict stock, then this subseries is called a K-line pattern series, a K-line pattern for short. For instance, when a subseries appears, the stock price will often rise or descend. Then, this subseries is a typical pattern series.
What is iso9141 K-Line?
The bidirectional one-wire bus is one of the first ways to access to control devices. The entire communication runs over only one wire and is used for data transmission according to ISO 9141 in the automotive industry. The bus serially receives and sends data via one data line each.
How many ships are in K-Line?
Its fleet of 337 vessels is among the most advanced in the world, and includes many new state-of-the-art containerships, tramp and specialized carriers, car carriers and tanker and gas carriers. The distinctive red “K” Line containers are among the most sophisticated in the world.
What voltage is K-Line?
How do you analyze a K line?
In the K-line, if open price is lower than close price, K-line also called Yang line, the body is usually filled with white or green color, as shown in Figure 2(a). And if open price is higher than close price, K-line also called Yin line, the body is usually filled with black or red color, as shown in Figure 2(b).
Why is it called K-Line?
In K-line series, if a K-line subseries contains some knowledge used to predict stock, then this subseries is called a K-line pattern series, a K-line pattern for short. For instance, when a subseries appears, the stock price will often rise or descend.
Is K-line a good company?
Good company to work with, long waiting time Few ships with large pool of seafarers, very long waiting time, promotion to top level is difficult as no vacancy on top.
What should voltage be on OBD2 port?
Yes, the OBD II port is always hot (12V). With wire strippers, electrical tape and a soldering iron you can modify anything that you want. The diagnostic connector on vehicles over 10,000lbs is not required by law to be OBD II.
What is K line in chart?
The K-line chart also called the candlestick chart, consists of four elements: close price, open price, high price, and low price, mainly used to display stock, futures, and other transaction data in the financial field.
How do you read a stock K line?
How do I learn to trade charts?
How to read stock market charts patterns
- Identify the chart: Identify the charts and look at the top where you will find a ticker designation or symbol which is a short alphabetic identifier of a company.
- Choose a time window:
- Note the summary key:
- Track the prices:
- Note the volume traded:
- Look at the moving averages:
How do you read a stock K-Line?
Can you check alternator with OBD?
INNOVA 6100P obd2 scanner provides battery & alternator tests to check the performance of a vehicle’s charging system. It does so by checking if the batteries and alternators are in line with voltage specs recommended for the vehicle.
What is KD line in stock?
KDJ indicator is a technical indicator used to analyze and predict changes in stock trends and price patterns in a traded asset. KDJ indicator is otherwise known as the random index. It is a very practical technical indicator which is most commonly used in market trend analysis of short-term stock.
What is a K line?
A K-line, or Knowledge-line, is a mental agent which represents an association of a group of other mental agents found active when a subject solves a certain problem or formulates a new idea.