How do you sand down a nightstand?

Once your nightstand is stripped to raw wood, go over it with 220-grit sandpaper for a uniformly smooth surface, then wipe down with a tack cloth to remove the dust.

What kind of paint do you use on a bedside table?

Choose oil-based paint for a harder finish. Lightly sand the edges of the painted nightstand for shabby chic decor. Consider painting the top of the nightstand white, using a contrasting color on the other surfaces to achieve a designer look.

What kind of paint do you use on a nightstand?

Satin or semi-gloss paints are ideal for most furniture pieces. No matter whether you’re choosing an interior or exterior paint, you’ll see a range of sheens: flat (matte), eggshell, satin, semi-gloss, and high-gloss, in order of lowest to highest luster.

How much should you sand before staining?

On most raw woods, start sanding in the direction of the grain using a #120-150 grit paper before staining and work up to #220 grit paper. Soft woods such as pine and alder: start with #120 and finish with no finer than #220 (for water base stains) and 180 grit for oil base stains.

How do you change the color of a nightstand?

Question: Q: Apple Watch Nightstand Mode Color To change the text colour to a shade of grey: On your iPhone, in the Watch app, go to: My Watch (tab) > General > Accessibility > turn on Greyscale. It is not otherwise possible to change the colour of the text when your Apple Watch is in Nightstand Mode.

Is Rustoleum spray paint good for wood?

Even though Rustoleum is primarily designed for metals, you can paint wood with it as long as you prepare the wood surface properly. Consider using an oil-based Rustoleum product to get the best results. You will want to sand down the wood surface and wipe away the sanding dust with a tack cloth or damp lint-free rag.

Can I spray paint wood furniture?

If you aren’t handy with a brush, spray paint can work magic on any kind of furniture – wood, metal, and even plastic. Spray paint has quite a few perks compared to its brush-applied counterparts.

What happens if you don’t sand before staining?

A lot of folks make the mistake of sanding to either too fine of a grit or not fine enough before applying stain. Too fine and the wood won’t be able to accept the stain. Too rough and the wood will be very dark almost to the point of being black.

How do you make an old nightstand look modern?

Give It a Whole New Look With Paint Lightly sand the piece with 180-grit sandpaper, and paint two coats of primer followed by two coats of paint in any desired color. Seal it with 2-3 coats polycrylic to keep it from yellowing over the years, and let dry for at least 24 hours.

Can you paint over pine wood?

You can paint over treated pine, but manufacturers of treated lumber suggest you leave the wood dry for about a year before painting. After the wood is installed, leave it to dry for a few months, then prime and paint. It takes several coats.

What kind of spray paint can I use on wood furniture?

What’s the best furniture spray paint? Enamel, a hard-drying paint made for furniture, trim, and cabinets, is a bit less forgiving but much more beautiful, durable, and long-lasting than a satin finish latex wall paint. Try Rust-Oleum Universal for aerosol application.

Does rustoleum need primer on wood?

Priming is usually not needed when using Rust Oleum paint on metal surfaces. However, when painting wood with Rust Oleum, you must prime the wood before applying the paint over it to create a durable finish. The primer helps the paint stick better and last longer.

Is it better to spray paint or brush paint wood furniture?

Spray painting is faster than brush painting. Most spray paint is oil-based and provides a more durable finish than latex paint. Spray paint can be used on practically any surface, including wood, metal, wicker, plastic and resin. Spray paint dries much more quickly than brushed-on paint.