Where is the transmission control module on a 2006 Chevy Silverado?

The transmission control module in a 4l60e transmission is typically located on the rear of the transmission case, directly under its cover. It is found beneath the engine control module. It may also be found near the battery or center console inside a car, depending on the vehicle model.

How do you reset the TCM on a 2006 Chevy Silverado?

To reset the TCM, I turn the key to the ON position, step on the accelerator pedal for 10 seconds, turn off the engine, release the accelerator pedal and wait 5 minutes for the engine to restart.

What is dic on Chevy?

Chevrolet Silverado: Information Displays / Driver Information Center (DIC) (Base Level) The DIC displays are shown in the center of the instrument cluster. The displays show the status of many vehicle systems. The trip odometer reset stem in the instrument cluster is used to access the DIC menu items.

Can you fix a transmission control module?

Another option is to repair your TCM. The transmission control module repair cost will in almost all cases be lower than replacing with a new module. On average, expect to pay around $300 to repair your transmission control module.

Does a TCM need to be programmed?

When you install a new TCM in these vehicles, it must be programmed with dealer-level equipment or equivalent, and the programming must be performed on the vehicle. What’s more, you should never try to drive the vehicle to the dealership after the repair; it may cause premature transmission failure.

Where is the DIC button?

The DIC display is located at the bottom of the instrument panel cluster. It shows the status of many vehicle systems and enables access to the personalization menu. The DIC buttons are located on the instrument panel, next to the steering wheel.

What is DIC in auto?

DIC. Driver Information Center. Automotive Systems, Automotive, Technology.

How do I reset my Chevy Silverado transmission?

How do you reset the transmission control module in your Chevy Silverado? Turn the key, press the gas, wait, turn the key off, release the gas, wait, and you’re ready to go.

How do you reset a TCM Chevy Silverado?

Where is the factory amp on a 2007 Chevy Silverado?

And it is located under the center console.

Can you ground an amp to negative battery terminal?

The best way to ground your car stereo components is to run a 10 or 12-gauge wire from the amp, and 12-gauge from all other components, such as head unit and active crossovers, to a central location. Then run a single ground to the best source of ground, the negative terminal on your car’s battery.

What is a DIC reset button?

(Set/Reset): Press this button to set or reset certain functions and to turn off or acknowledge messages on the DIC.

What is the DIC button?

This system allows the driver to select what data is being displayed in front of the driver. Some vehicles have controls for the DIC next to the instrument panel in the form of 4 buttons stacked vertically. Others simply rely on the stem that also resets the trip odometer.

What does DIC mean in a truck?

DIC. Direct Ignition Cassette. Ignition, Cassette, Repair. Ignition, Cassette, Repair.